 |
|
 |
 |
 |
 |
 |
 |
 |
|
| Find Products by: Product Index/Catalog |
||
|
|
||
|
||
| Don't Forget: Layline Offers Gift Cetificates |
Traveler Systems
|
|
|
| Swivel Ear for H171 Car | |||
|
Description: % Swivel Ear for H171 Car Price: $1.53 |
||
| Harken Torlon Ball Bearings | |||
|
Description: 177 Ball Bearings 1/4" Torlon (21) Description Replacement Torlon balls (HL cars) Weight (oz) .5 Ball dia. (in) 1/4 Balls per Package 21 Price: $9.02 |
||
| Harken Small Boat CB Cars | ||||||||||
|
Description: Small Boat Captive Traveler Cars are used on large dinghies, keelboats, beach cats and offshore boats to 27 ft (8 m). The one-piece solid aluminum construction is lightweight and strong. Ball bearings run on machined aluminum Hardkote-anodized races for smooth trimming and easing. Stainless steel wire guides keep the balls captive when the car is off the track. Cars with a 500 lb (227 kg) safe working load use Delrin® balls. Cars with w higher safe working load use high-strength Torlon® balls. Ti-lite cars matched with Ti-lite blocks provide the ultimate, lightweight, low-profile system. High-tech line replaces shackles and spring. Consult chart at http://www.harken.com/charts/travelerusechart.php to size traveler to mainsail area. Price: $0.00
|
|||||||||
| Harken Midrange CB Cars | ||||||||||
|
Description: Midrange Captive Ball Traveler Cars are built to handle high loads on boats from 27 ft to 34 ft (8 m to 10 m). The one-piece solid aluminum construction is lightweight and strong. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race. Stainless steel wire guides keep the balls captive. Shackle/toggle cars have low pivot points to handle non-vertical loads. On 1626 and 1627 cars, blocks attach directly to the toggle ears for a low-profile, compact system. 1640 and 1641 cars use car-mounted control blocks. Midrange Car Controls Blocks Car mounted control blocks features ball bearing sheaves and mount to the 1624 and 1625 car clear of track end controls. Couplers 1557 and 1614 couplers connect cars to allow higher mainsheet loads. Short coupled cars can roll on a tighter radius than one long car. Price: $0.00
|
|||||||||
| Harken Micro CB Track and Cars | ||||||||||
|
Description: Micro Captive Ball Traveler Cars are used on small dinghies and catamarans. The one-piece solid aluminum construction is lightweight and strong. Machined aluminum Hardkote-anodized races permit Torlon® balls to transition smoothly from the active-to-return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle cars have low pivit points to handle non-vertical loads. 2703 Ti-Lite cars matched with Ti-Lite blocks provide the ultimate, lightweight, low-profile system. High-tech line replaces shackles and spring. Control lines attach with a loop splice or clove hitch. Consult Use Chart at http://www.harken.com/charts/travelerusechart.php to size traveler to mainsail area. Micro track comes in low and high-beam configurations. The wide track base adds stability and protects cored decks. A channel on the track bottom makes it easy to install on unfair decks and eliminates rocking on curved surfaces like booms or masts. Fastener holes fit both metric and imperial screws. 16 mm control blocks spin on stainless steel balls that roll freely under high loads. The step-down design keeps the controls low and clear of the mainsheet block. Super-tough plastic endstops absorb sudden shock loads that can occur during unintentional jibes. Price: $0.00
|
|||||||||
| Harken Small Boat CB Track and Controls | ||||||||||
|
Description: Small boat track comes in low or high-beam configurations. Use low-beam track when it's supported at each fastener hole. Use high-beam track when it must span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Endstops and Trim Caps Use 173 and 174 endstops for small dinghies and low-load situations. The 446 line-shedding endstop is low-profile and snag-free. The 263 and 264 heavy duty endstops absorb the shock loads of unintentional jibes and are used on larger dinghies and small keelboats. Use 2722 and 2723 trim caps to finish track ends when using control block assemblies. Sold in pairs. Fasteners not included. Harken® Small Boat traveler controls allow installation of 2:1 to 4:1 purchases. Compact, high-strength Carbo AirBlock® components combined with Micro Carbo-Cam® cleats keep traveler weight minimal. Color code cleats using 424 Flairleads. For angled cleating, install the 372 X-treme Angle Fairlead. The 384 Traveler block features high-load composite bearings to handle wire and high-strength line. Use with the 382 Radial Traveler car and other Small Boat cars to configure a Radial Vang. Don not use as mainsheet traveler. Price: $0.00
|
|||||||||