The Pilot Hatch is a sliding hatch styled to
match the Low and Medium Profile Hatches.
It is designed for use on the Wheelhouse or
Cockpit canopy of a power craft.
The hatch opens up enclosed steering
positions, allowing the helm and crew to
experience the sunshine and fresh air on fine
days. Unlike a hatch with a hinged lid, the
handle on the Pilot Hatch never moves out of
reach or requires lifting from a difficult angle
when the hatch is fully open.
The lid is moved using a single handlebar that
also rotates to seal down the hatch. When full
ventilation is not required, the lid can also be
secured with a 5cm opening. The pilot hatch
uses Lewmar's unique seal system for
improved sealing and easy servicing. The
acrylic can be replaced without the use of
sealant. The sliding technology comes from
Lewmar's racing hardware track systems,
ensuring minimum friction.
• Hatches should be fitted to a flat surface with a maximum tolerance of ± 1mm.
• The pilot Hatch is only for use on wheel houses and cockpit canopies. It is not
suitable for use on normal decks and coachroof applications.
• Fastening size for lower frame and sliding track use 5mm CSK screws No. 10
• The pilot hatch cannot be operated from the outside.
Part Number: 30069900