Store Categories

Special Sections

Harken Cruise Electric Furler 3EHarken
HAR74131312V - Harken MKIV Unit 3 Electric 12 V
Code: HAR74131312V
Original Price: $14,893.00
Price: $13,105.84
HAR74131324V - Harken MKIV Unit 3 Electric 24 V
Code: HAR74131324V
Original Price: $14,893.00
Price: $13,105.84
HAR74132234 - Harken Unit 3 Jaw/ Jaw w/ link plate w/ 3/4 in. (19.1 mm) Clevis Pin
Code: HAR74132234
Original Price: $799.00
Price: $703.12
HAR74132278 - Harken Unit 3 Jaw/ Jaw w/ link plate w/ 7/8 in. (22.2 mm) Clevis Pin
Code: HAR74132278
Original Price: $927.00
Price: $815.76
HAR741330 - Harken Unit 3E Extra 7 ft. (2.13 m) Luff Foil Extrusion
Code: HAR741330
Original Price: $166.50
Price: $133.20
HAR741331 - Harken Unit 3E Extra 9 3/4 (248 mm) Connector w/ Bushings
Code: HAR741331
Original Price: $72.50
Price: $58.00
HAR742622 - Harken 22 Rod adaptor stud (thread ? UNF 3/4 in.)*
Code: HAR742622
Original Price: $640.00
Price: $512.00
HAR742730 - Harken 30 Rod adaptor stud (thread ? UNF 7/8 in.)*
Code: HAR742730
Original Price: $651.00
Price: $520.80

Harken Cruising Furling System 3E Electric - Overview

Designed for large cruising boats, Harken 3E Electric Furling is a headsail system that helps you get the most out of your boat, while letting you comfortably reef, furl, and set sails from the cockpit with the push of a button.

High-Strength Materials, Sculpted Design:
The torque tube, motor, and gear housing are deep-saturation hardcoat-anodized, UV-stabilized aluminum. The sculpted gear box and streamlined motor housing is sealed with high-quality lip seals. The motor mounts vertically into pulpits, clearing anchor tackle and providing low windage.

High-Torque, High-Efficiency Motor:
The motor is a permanent magnet design and features high torque and low power consumption. Inside, the hardened steel gears are permanently lubricated. The reversible drive uses a high-reduction worm gear set to prevent reefed sails from unfurling under load.

Easy to Install or Upgrade:
C-shaped connectors slip over the headstay without feeding wire through the connector. The lower unit fits over the existing turnbuckle allowing easy length adjustment. Easy upgrade from a MKIV Unit 2 and 3 manual unit.

1. Strong Foil Joints- Tough triple-interlock foil joints withstand years of torque loading.
2. 12- or 24-Volt Systems- Available in 12 or 24 volts; switches and 12- or 24-volt control box and circuit breaker included.
3. mergency Manual Operation- Use supplied crank handle or cordless drill adapter.
4. Scratch-Resistant Link Plates- Stainless steel link plates fit over standard turnbuckle, resist scratches, and can be easily repolished.

Harken Cruise Electric Furler 3E

We at Layline strive to be your source for Harken Cruise Electric Furler 3E and all sailboat hardware, rigging, and sailing gear. With our focus on one design and handicap racing we can offer advice and reviews of what you need to compete. If you need any assistance selecting the appropriate Harken Cruise Electric Furler 3E please contact us. Our crew is ready to help!
PayPal Layline, Your One Design Center and Sailboat Racing Specialists
© Site content copyright Mauri Pro Sailing, LLC. All rights reserved
Site developed by Mauri Pro Sailing
Mauri Logo